How to Make Your Pennant Banner

Supplies I used.

Supplies I used.

 

What you will need:

– your printed pennants
– scissors or an exacto knife, cutting mat & ruler
– string
– a hole punch, I used a Crop-a-dile


Step 1:

Cut out your pennants.

Step 2:

Punch a hole, about 1/4″ to 1/2″ in at the top on either side of each pennant.

Step 3:

Depending on how you plan on laying out your pennant banner, cut a piece of string long enough to fit your pennants side by side for each line of wording you plan to do. I usually do each word on a separate piece of string so I can hand them up underneath each other. Weave the string in and out of the holes so that the string is going behind the pennant, not on top.

IMG_1162